LUMYNA
High Speed Hair Dryer
Dries in record time without the use of excessively high temperatures. For healthy, irresistible luminosity!
Features:
- digital high-speed brushless motor: 110.000 rpm
- lifetime of 10.000 h
- power: 1200 W
- ion technology
- light as a feather: 325 g
- reduced noise level: 65 dB
- 4 temperature and 3 speed settings, cold air button
- digital display indicator
- automatic self-cleaning function
- removable filter attachment
- 3 m professional cable
- mains operation: 220-240 V | 50-60 Hz
- accessories: magnetic ondulating nozzles (6.4 cm; 9.5 cm), diffuser, cleaning brush
- Packaging content: 1 piece(s)
DRY IN HARMONY FOR HEALTHY LUMINOSITY!
PRECISE, FAST DRYING:
The high-speed brushless motor operates at an impressive speed of up to 110.000 revolutions per minute and generates a powerful, ionized airflow that enables precise and fast drying of the hair without any heat at all.
RELAXING WEIGHT:
Designed for demanding and intensive use, this product is particularly lightweight with a weight of only 325 g. This significantly reduces the strain on joints and muscles.
LONG-LASTING JOY:
Every hair structure is unique and requires individually adapted temperature settings and airflow strengths. The digital display makes it easy to set the right combination of temperature and airflow. With regular use of the automatic self-cleaning function, a service life of up to 10.000 hours can be achieved.
THE RESULT: HEALTHY HAIR FULL OF BOUNCE AND INCREDIBLE BRILLIANCE!
FEATURES:
- digital high-speed brushless motor: 110.000 rpm with a service life of 10.000 h
- power: 1200 W
- reduced noise level (approx. 65 dB)
- ion technology
- light as a feather: 325 g
- 4 temperature and 3 speed settings
- cold air button: instant cold air blast for styling fixation
- digital display indicator
- automatic self-cleaning function
- removable air-filter
- 3 m professional cable
- mains operation: 220-240 V | 50-60 Hz
- accessories: magnetic attachments: ondulating nozzles (6.4 cm; 9.5 cm), diffuser, cleaning brush
| Air flow rate (l/sec) | 26,7 l/s |
|---|---|
| Air speed (km/h) | 82.8 km/h |
| air speed settings | 3 |
| cold shot button | yes |
| colour | pearl-cendré |
| cord length (m) | 3 m |
| cord type | Mains cable |
| frequency range (Hz) | 50-60 Hz |
| mains / battery operation | Mains operation |
| motor | Digital high-speed brushless motor |
| on/off switch | yes |
| operating voltage (V) | 220-240 V |
| overheating protection | yes |
| power (W) | 1200 W |
| revolutions/minute | 110.000 U/min. |
| temperature levels | 4 |
| volume (dB) | 65 db |
| weight without cable (g) | 325 g |
| with display | yes |
| with ion technology | yes |
| Contents (pcs.) | 1 |
| weight | 325 g |
Usage manuals for download
OPERATION
Description:
1. styling attachment
2. air inlet (internal filter)
3. external filter
4. removable protective grille
5. cold air button
6. Air speed setting
7. temperature setting
8. on/off switch
9. LCD display
10. sensor light indicator for temperature and fan
Accessories:
1. Ondulating nozzle
2. ondulating nozzle
3. diffuser
Instructions for use:
▷ Make sure that your hands are completely dry before connecting the appliance to the power supply.
1. Operate the on/off switch by pressing and holding the button
2. The default setting is cold air with room temperature and fan level 1
3. Now set the desired temperature.
4. Indications on the LCD display: The display shows which settings you are using.
▷ If the air inlet is blocked by items of clothing, quilts, towels, cotton, dust, etc., which block the air inlet, the display will show which settings you are using. If the air inlet is blocked by items of clothing, quilts, towels, cotton, dust, etc. that may cover the air inlet, the fan switches off to prevent malfunctions or damage caused by overheating due to continuous operation of the fan and displays a white warning light. You can end this protection by unplugging the mains plug and switching the appliance back on. If the appliance fails, the white light dot on the display flashes.
Cleaning, care & storage
▷ Switch off the appliance and disconnect it from the mains before maintenance. Only clean when cool!
Regular filter cleaning:
▷ ATTENTION: The high-performance motor is protected by the air inlet filter. It is therefore essential to clean the filter after 3 days of intensive salon use. This is the only way to protect the motor, ensure that the appliance functions correctly and guarantee a long service life. The accumulation of dirt due to improper cleaning of the filter can lead to damage to the motor!
Automatic cleaning function:
This hair dryer has an automatic cleaning function for cleaning the internal components.
1. switch off the hair dryer.
2. press and hold the "Cool Shot" button for 3 seconds. The motor then switches the fan in the opposite direction for 7 seconds.
▷ This function is only active once when the power is switched on. If you want to reactivate this function, please unplug the power cable and plug it in again. Now you can perform a new cleaning.
Manual filter cleaning
▷ Switch off the hair dryer and make sure you have disconnected your appliance from the power supply before cleaning the filter.
1. Hold the handle firmly and remove the magnetic filter and the external filter.
2. Use the cleaning brush provided to remove the dirt from the filter and the filter mesh.
3. Then replace the filter and the external filter.
▷ CAUTION: Do not use water for cleaning.
▷ CAUTION: Do not press too hard on the filter screen as this may deform or damage it.
Button lock/locking function:
This is used to lock the buttons in the hairdryer application during an operating process.
Locking mode: If the buttons are not pressed for 3 seconds, they are locked. The temperature and blower settings cannot be adjusted accidentally.
Unlock mode: By double-clicking the ON/OFF button (locking symbol), the buttons are unlocked again and the temperature and fan can be adjusted. the display flashes in unlock mode.
Storage
Make sure that the appliance is protected from dust and other environmental influences.
Spare parts
Only use original spare parts that you can order from your EFALOCK service partner.
DISPOSAL
This device is labeled in accordance with Directive 2012/19/EU on waste electrical and electronic equipment (WEEE). At the end of its life, this electrical appliance must not be disposed of in the residual waste garbage can, but must be handed over at a collection point for the recycling of electronic equipment. This also applies to electrical appliances that were last used in the non-private sector, e.g. in trade or commerce. If a non-privately used electrical appliances has been refused by the responsible municipal disposal facilities, their waste advice center will provide information on environmentally friendly disposal.
The symbol on the product, the operating instructions or the packaging indicates this. The materials are recyclable according to their labeling. The reuse, recycling or other forms of recovery of old appliances make an important contribution to protecting the environment.
IMPORTANT SAFETY INSTRUCTIONS:
▷ All safety instructions should be read carefully before use.
▷ Before using the appliance, check that the power setting of the appliance matches the socket. When using electrical appliances - especially when children are nearby - basic safety measures must be observed.
▷ Intended use: This appliance is only suitable for drying human hair.
▷ The appliance is designed for indoor use only and has been developed for professional use in hairdressing salons.
Caution!
Electrical shock:
- Unplug the appliance after use.
- Keep the appliance away from moisture, water and other liquids.
- The appliance must not be used in the bath, in the shower, over a washbasin filled with water or with wet hands.
- The appliance must not be immersed in water or other liquids. Do not touch an appliance that has come into contact with water - immediately pull out the mains plug.
- The appliance must be disconnected from the mains for cleaning, care and maintenance.
- Do not use the appliance if the connection cable is damaged. Disconnect the appliance from the mains immediately and inform EFALOCK customer service.
WARNING:
Do not use this appliance near bathtubs, sinks or other vessels
that contain water.
Caution!
Swallowing of small parts:
- Keep the appliance out of the reach of children. Also keep the packaging material, such as foils, away from children.
Property damage and personal injury:
- Never leave the appliance unattended when it is switched on. Careful supervision is required when the appliance is used with / for / or near children or disabled persons.
- Do not use the appliance for any other purpose.
- Do not use any parts not recommended or sold by the seller.
- Keep the connecting cable away from hot surfaces.
- Check the appliance frequently for damage, especially cables and plugs. If in doubt, have the appliance checked by an authorized repair shop.
- If the appliance is not working properly, has been dropped, damaged or dropped into water, do not attempt to repair the appliance yourself, but take it to customer service.
- Repairs may only be carried out by an authorized customer service.
- Never wrap the cable around the appliance.
- The air inlet must not be covered. Clean the air inlet regularly to protect the appliance from overheating. The appliance is equipped with a safety thermostat. In the event of overheating (e.g. if the air inlet is blocked), the appliance switches off automatically. In this case, contact customer service.
- The appliance generates heat during use. If the set temperature seems too hot, set the temperature lower.
- Do not use hairspray while the appliance is switched on.
- Allow the appliance to cool down after use.
- The air outlet, the metal ring and the attachments may be hot during use.
NOTE!
Persons (including children) whose physical, sensory or mental capabilities, or lack of experience and knowledge, make it unsafe to use this appliance should not use it without supervision or instruction by a responsible person. Children should be supervised to ensure that they do not play with the appliance.
NOTE!
For added protection, the installation of a residual current device (RCD) with a rated tripping current not exceeding 30 mA in the bathroom circuit is recommended. Ask your installer for advice.
More information about the product in the catalogue
